PlastiSolv™ 842 On Press Cleaner is an environmentally approved, 100% active, virtually odour free textile ink remover which can be effectively used at the press and in the reclaim area. PlastiSolv 842 On Press Cleaner cuts ink fast and quickly dries for on press colour changes, screen opening or saved screens. 3.79 litres (1 US Gallon) 18.93 litre (5 gallon) pack (5x 3.79L(1 US Gallon))
Always wear the correct PPE when using cleaning agents. A mask, glasses and chemical gloves are a must. Remove all excess ink for the screen using a scraper or good scoop. Apply the plastisol 842 with a rag to the ink side of the screen, Thoroughly agitate the ink with a rag and then wipe up all disolved ink. Reapply if nessessary and follow with a dry rag, Wipe both sides of the screen. The screen will then ready for printing or tape application within 10-15 seconds.
If you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or Email
Safety Data and Technical sheets:
**Please note; this item may incur extra shipping charges overseas that are imposed by our courier.
We love how easy this product has made cleaning ink, glue and fluff (from garments) off of the floor and our press. We tried so many products to try and get the glue off of our floor but nothing worked. This stuff works like magic! We spray it and within about a minute it comes off with ease! :)
We used to use the Franmar product range for screen wash and reclaim which was great (especially Icky Sticky Unstuck). The Easiway product range just as good though and actually seems to last a bit longer than Franmar. Use a squirty bottle to dispense the screen wash. Don't use the spray function as we don't want to breathe in the vapour - in fact we use a proper mask and gloves if cleaning a lot of screens. We don't use in reclaim area. We had problems with drainage in the washout booth once and instead of fixing it straight away we left water and Easiway screen wash in the washout booth overnight. Next day we found that it had degraded the silicon in the washout booth and we had leaks everywhere - lol serves us right for being lazy. Easy enough to clean screens on press. We use a bit of perspex to protect the pallets from getting screen wash all over them. Makes light work for easily the worst job in a screen shop.