Perfect for those starting out
Containing 19 non-phalate, high performance colours of exceptional quality; 10 base inks (size: 1L) and 9 vivid fluorescents (size: 0.5L) to catch eyes
The Small Pantone Starter Kit contains:
- 7519 Fluorescent Magenta
- 7521 Fluorescent Violet
- 7523 Fluorescent Blue
- 7525 Fluorescent Green
- 7527 Fluorescent Yellow
- 7529 Fluorescent Lemon
- 7531 Fluorescent Orange
- 7533 Fluorescent Pink
- 7535 Fluorescent Red
- 7503 Yellow
- 7505 Scarlet
- 7507 Red
- 7509 Violet
- 7511 Marine Blue
- 7513 Blue A
- 7515 Blue B
- 7517 Green
- 7536 Black
- 7538 Mixing White
7500 Series Ink Capabilities
Create special or standard colors by using International Coatings’ UltraMix®, Pantone® color matching software, either online or on the desktop version.
Well suited for fine detail and halftone printing using finer mesh counts.
The 7500 Series inks will spot dry, with a very low after flash tack. Dwell time is dependent on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should be just dry to the touch, with no lift-off, but not totally fused. Total fusing of any flashed color may cause inter-coat adhesion problems with the inks printed on top of the flashed ink. Final fusing or curing should occur in the dryer.
In order to achieve the best color matching results using the 7500 Series Pantone® Color System, the specified system primaries must be used. Using colors other than the specified primaries will produce inaccurate matching results.
Colors produced using the 7500 Series Pantone® Color System will vary in opacity. Colors will reproduce best on white or light colored fabrics. Colors may appear metameric (not match well) when viewed under different types of lighting.
Adding too much reducer or other additives to the 7500 Series inks may cause curing/ fusing or increased dye migration problems.
Use an underbase print when printing 7500 Series inks onto dark fabrics. Use 711, 7014, 7031, 7038, 7041 or 7042 white as an underbase ink. To achieve a softer hand and faster production speeds, print underbase ink through finer mesh counts (230 to 305 t/in or 90 to 120 t/cm mesh).
Test dryer temperatures and wash test printed product before and during a production run.
View the Product Data Sheet here