Amex Plastisol Puff Additive

£20.04 - £85.88 + VAT
(No reviews yet) Write a Review
Current Stock:


This additive is made to achieve a puff 3D effect without changing the inks printability, brightness and wash fastness. You can also use a little additive in the ink to give the print a more matte finish. The Plastisol Puff additive can be used with all AMEX inks. If you are planning to use this additive with inks which are not AMEX, please wash test first. You can add the puff additive to the ink at a percentage from 5% to 20%. Please start with a smaller percentage to see if it's suitable for your print these bases are suitable for manual or automatic printing.


• Gives a 3D effect
• Matt off shiny inks
• Can be mixed into colours.
• Good washing resistance.


To obtain best results use decent tension screens 34T/(80) to 90T/(230) both for manual printing and automatic presses – best results with a sharp squeegee blade.


Curable reducer. (Ink thinner)

Clean up

Please use Easisolv 842, Easiolv 701, Stinky Screen Wash or Franmar, please dispose of any cleaning consumables in a safe manner and use the correct PPI.


Plastisol will be fully cured at 165°C. Printed garments need to be passed through a quality dryer and the ink film needs to reach the desired temperature to be fully fused, variables such as garment thickness and colour, ink deposit and operating climate will need to be taken into account when setting your oven parameters. Always wash test production to ensure prints are adequately cured.

More information.

If you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or Email

Safety Data and Technical sheets: