Tekmar Cleaning Solutions
TB HV Waterbased Pallet Adhesive is a revolutionary new pallet adhesive that can be hand applied directly to the pallet. Water based, with no solvents or other hazardous ingredients, TB-HV is non-hazardous to use. TB-HV affords tremendous economy, 1 litre can replace up to 3 dozen cans of spray adhesive with absolutely no mess or waste. Heat stable up to 700 degrees F (370 degrees C), TB-HV can withstand repeated flashing, without losing its tack.
Application is simple. A 1/8″ bead of TB-HV is applied in a line across the pallet. The supplied squeegee is then used to quickly spread the adhesive over the pallet. The adhesive dries in seconds due to it’s advanced acrylic polymer and high solid content. A minimum of 3-6 Doz. Shirts can be printed on a single application. There is no messy over-spray and no waste. TB-HV is a ideal product for manual printers wishing to eliminate Aerosol adhesives from their shops.
If you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or Email
Safety Data and Technical sheets
What can I say, no mixing, no bucket of adhesive with a paint roller, no work at all. In the past we have used may different adhesives, they have all done the job, but had issues, mainly with storing the mixed glue, messing around with paint rollers, spending time have to flash pallets to just the right point to get the glue just right so its sticky enough to not come off on the shirts but not over dried so it stops working. But the main plush point, its in a bottle that you just squeeze and spread it out, combine it with pallet tape and we can go from dirty pallet to clean pallet and printing in less than 15 minutes for the whole machine. I wish I had found this years ago, the amount of spray tack we have consumed, paint rollers, puddles on the floor, every glued up shoes by kicking over pots of mixed adhesive by mistake. It really is the perfect product.