Ultra Mix 7500 pantone mixing system from International Coatings is a very accurate pantone mixing system straight out of the states, available only in US gallon tubs.
ICC inks are all phthalate free and by using the Pantone® colour matching software, either online or on the desktop version, you can mix up to 99.9 % of pantone colours. It’s well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series inks will spot dry with a very low after flash tack and can be used in Automatic or hand printing. Use an under base / Flash white when printing onto dark fabrics to give best results.
- Accurate Pantone colours
- Bright colours.
- Good washing resistance.
- Wet on wet printability.
To obtain best results use decent tension screens 34T/(80) to 90T/(230) both for manual printing and automatic presses – best results with a sharp squeegee blade.
- Curable reducer. (Ink thinner)
- Soft hand base. (for softer prints on lighter shade garments)
- Puff Additive.(for raised prints)
- Low cure additive (reduce temperature of curing )
- Dull/SUEDE additive
Plastisol will be fully cured at 165°C. Printed garments need to be passed through a quality dryer and the ink film needs to reach the desired temperature to be fully fused, variables such as garment thickness and colour, ink deposit and operating climate will need to be taken into account when setting your oven parameters. Always wash test production to ensure prints are adequately cured.
If you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or Email
Safety Data and Technical sheets: