Screen Sol QT Emulsion with sensitiser

£16.47 - £73.14 + VAT
Bulk Pricing:

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 4 - 29 and get 10% off
  • Buy 30 or above and get 15% off
(5 reviews) Write a Review
Current Stock:


Made in Italy, this is a great and easy to use emulsion for most types of ink, with fast exposure times and is simple to reclaim. The emulsion includes the required sensitiser and works well for beginners and advanced printers.

Check out this blog post to see which emulsion is best for you 


  • Dual-cure photoemulsion for any kind of ink.
  • High definition for screens up to 150 T/cm mesh.
  • Very good resistance to plastisol inks, water based inks and solvent based ink, Also for discharge printing.
  • Excellent stability on the screen.
  • Suitable to work with any kind of light source.
  • Easy reclaiming of the screen.
  • Easy to use.




Screen Chem Catalyst - (makes emulsion permenant)




Add a small amount of water to diazo-sensitiser and shake well. Next, mix the whole dose with SCREEN-SOL QT, stir well and then let it settle for approximately 2 hours to eliminate air bubbles. Since it is a polymer emulsion we recommend you work in an area with low to little light, not under a direct light or in sunlight. 


We recommend you degrease the mesh. As a general indication, we suggest you apply 1 or 2 coats of emulsion on the external face of the screen and 1 or 2 coats on the internal face, wet on wet.



We advised that you dry the screen in a ventilated oven, in horizontal, at 30-35°C for 40-60 minutes according to the coating thickness.



Lamp type, distance from lamp to screen, mesh type and coating thickness can affect exposure time. To determine the correct exposure time we suggest you conduct some tests with an exposure calculator. Our suggestion: Lighting halogen: 5000W Application: 1-2 internal coats, 1-2 external coats Mesh 120T white 60 sec.



If stored in it's original container at a temperature between 15 and 25°C this product will preserve it's characteristics for at least 1 year from the date of production. Once mixed, sensitised, it will last up to 8 weeks.


Clean up 

Please use Easiway 500 TO remove this emulsion or easiway supra for use with a dip tank. 


How to washout emulsion for exposure 


Which emulsion is best for you?

More information

If you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or Email


Safety Data and Technical sheets:

amex dual cure emulsion TECH SHEET amex dual cure emulsion SDS


  • 5
    Product Review

    Posted by David Hurley on 4th Nov 2021

    Perfect works every time, always get great exposure

  • 5
    becoming my all round emulsion

    Posted by Chessie Rosier-Parker on 7th Sep 2020

    I am starting to use this as my studio staple emulsion. I have done many long runs without any trouble and it is holding up to a big range of inks I am throwing at it. It also reclaims easily with the Eco and Franmar cleaning products

  • 5
    Customer review

    Posted by Gary Jackson on 11th Jun 2018

    Great value on the emulsion and quick delivery and flawless transaction. Love the Amex products

  • 5
    Customer review

    Posted by Aimee Hibberd on 4th May 2018

    Best emulsion we've ever had. Tried several different brands and nothing else compares. Lasts ages, coats easily and is easy to reclaim even if it's sat on the screen for weeks.

  • 5
    Customer review

    Posted by teeshappy on 25th Jul 2017

    This is really excellent emulsion, we don't use anything else. Normally coat 2 (outside)+1 (inside) using thin edge of scoop coater, probably get about 30+ screens done per 1 kg pot. Shelf life used to be given as 6 weeks after mixing with sensitizer. Not sure if that's still the case, but we've used emulsion up to 12 weeks after mixing with no problems. Easy reclaim too!