Made in Italy, this is a great and easy to use emulsion for most types of ink, with fast exposure times and is simple to reclaim. The emulsion includes the required sensitiser and works well for beginners and advanced printers.
Check out this blog post to see which emulsion is best for you
- Dual-cure photoemulsion for any kind of ink.
- High definition for screens up to 150 T/cm mesh.
- Very good resistance to plastisol inks, water based inks and solvent based ink, Also for discharge printing.
- Excellent stability on the screen.
- Suitable to work with any kind of light source.
- Easy reclaiming of the screen.
- Easy to use.
Screen Chem Catalyst – (makes emulsion permenant)
Add a small amount of water to diazo-sensitiser and shake well. Next, mix the whole dose with SCREEN-SOL QT, stir well and then let it settle for approximately 2 hours to eliminate air bubbles. Since it is a polymer emulsion we recommend you work in an area with low to little light, not under a direct light or in sunlight.
We recommend you degrease the mesh. As a general indication, we suggest you apply 1 or 2 coats of emulsion on the external face of the screen and 1 or 2 coats on the internal face, wet on wet.
We advised that you dry the screen in a ventilated oven, in horizontal, at 30-35°C for 40-60 minutes according to the coating thickness.
Lamp type, distance from lamp to screen, mesh type and coating thickness can affect exposure time. To determine the correct exposure time we suggest you conduct some tests with an exposure calculator. Our suggestion: Lighting halogen: 5000W Application: 1-2 internal coats, 1-2 external coats Mesh 120T white 60 sec.
If stored in it’s original container at a temperature between 15 and 25°C this product will preserve it’s characteristics for at least 1 year from the date of production. Once mixed, sensitised, it will last up to 8 weeks.
If you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or Email
Safety Data and Technical sheets: