Description
Description
Amex PF Low Temperature White.
Manufacturer Translation (Italian): Plast PF Bianco LT 09
Features
- Fast flashing
- high opacity white
- good matte down properties.
- Low after flash tack.
- low curing temps
Printing
This ink is Finely milled and can be printed through up to 77T mesh counts, but 43T is recommended for most applications both for manual printing and automatic presses – best results with a sharp squeegee blade.
Additives
- Curable reducer. (Ink thinner)
- Soft hand base. (for softer prints on lighter shade garments)
- Thinner Additive 86. (Ink thinner)
- Puff Additive.(for raised prints)
Clean up
Please use Easisolv 842 , Easiolv 701, Stinky Screen Wash or Franmar, please dispose of any cleaning consumables in a safe manner and use the correct PPI.
Curing
Curing is achieved at 130°C at approx. 1 minute. Printed garments need to be passed through a quality dryer and the ink film needs to reach the desired temperature to be fully fused, variables such as garment thickness and colour, ink deposit and operating climate will need to be taken into account when setting your oven parameters. Always wash test production to ensure prints are adequately cured.
More information
If you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or Email
You can find all SDS and TDS in our resources section
Reviews
There are no reviews yet.