Description
Description:
Cold Cure Additive or also known with its itallian name as: Texprint Catalizzatore extra is a clever little additive and very useful if you dont have accsess to a dryer or flash cure to cure your prints. Once added to your inks, it allows you to air dry your prints, it will then cure without heat after 48 hours. Superb for those heat sensitive fabrics. Once added, the ink then has a shelf life of 8hrs.
This can also increase the washing resistance on special fabrics too. Use 5-10%
Features
- Cures prints without heat
- Good printability
- Increases wash fastness for waterbased inks
Printing
To obtain best results use decent tension screens 34T/(80) to 90T/(230) both for manual printing and automatic presses – best results with a sharp squeegee blade.
Additives
- Retarder (to slow down the drying of ink on the screen)
- Clear Base (to base colour black or soften colour for printing onto light shade garments)
Clean up
Please use Water or Franmar Aquawash or Multipurpose Ink Remover, Easisolv 701 is useful to clean up and remove stains.
Curing
Add to ink and wait 48 hours , Once touch dry you can use a heat press or tumble dryer to speed up the process. Always ..Always wash test before production run.
More information.
If you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or Email
You can find all SDS and TDS in our resources section
Shane Bowers –
Works great with the Amex waterbase inks