{"product_id":"amex-screen-sol-hs-one-pure-polymer-emulsion-1kg","title":"Amex Screen Sol HS-ONE Photo Polymer Emulsion 1KG","description":"Amex Screen Sol HS ONE Emulsion is a ready to use one pot Photopolymer photoemulsion. This emulsion does not require a sensitizer.\u003cbr\u003e\u003cbr\u003eFor the preparation of screens for screen printing. Specially indicated with CTS system (DLE-LED) or Blue Ray exposing systems. Specifically Designed for use with Textile plastisol, solvent based and water-based inks for flat printing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGENERAL \u0026amp; TECHNICAL FEAUTURES\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e•Pure Polymer photoemulsion\u003cbr\u003e•Very fast exposure\u003cbr\u003e•Colour: Light Blue\u003cbr\u003e•Ready to use (without sensitizing)\u003cbr\u003e•Excellent resistance to plastisol and solvent based inks\u003cbr\u003e•Good resistance to water based inks\u003cbr\u003e•Solid content: 44 %\u003cbr\u003e•Viscosity: about 35.000 cps (25 °c)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eWe suggest you to apply 1 or 2 coats of emulsion on the external face of the screen and 1 or 2 coats on the internal face. To only be applied to clean, properly degreased and dried mesh only.\u003cbr\u003e\u003cbr\u003eMake sure you always work in an area with yellow safe light due to the increased sensitivity. Note - This emulsion is a READY TO USE emulsion from the pot without the need to add a sensitizer.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDRYING\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAt 30-35°C for 40-60 minutes according to the coating thickness. Use a dehumidifier in the drying area if possible.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEXPOSURE\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eLamp type, distance from lamp to screen, mesh type and coating thickness can affect exposure time. To determinate the correct exposure time we suggest to make some test with an exposure calculator.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOur suggestion:\u003c\/strong\u003e\u003cbr\u003e•Mesh: 55 Th\/cm\u003cbr\u003e•Lamp: UV metal-halogen 5000W\u003cbr\u003e•Distance: 1 mt\u003cbr\u003e•Application: 2 int. coats \/ 2 ext. Coats\u003cbr\u003e•Exposure time: 30 seconds\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDEVELOPMENT\u003c\/strong\u003e\u003cbr\u003eAt room temperature, dip the screen into water for 5 minutes then rinse it through a water jet with medium pressure.\u003cbr\u003eAfter dry it in an oven at 35°C.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRE-TOUCHING\u003c\/strong\u003e\u003cbr\u003eAfter development is possible to retouch the screen using a\u003ca href=\"https:\/\/screenprintworld.co.uk\/product\/blockout-filler\/\"\u003e blockout filler\u003c\/a\u003e or with more of the Pure Polymer photo-emulsion. In this case is needed to re-expose the screen for 60 seconds.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCATALYSTS\u003c\/strong\u003e\u003cbr\u003eTo increase the chemical and mechanical resistance if large printing runs are required and use \u003ca href=\"https:\/\/screenprintworld.co.uk\/product\/screen-sol-catalyst\/\"\u003eSCREEN-CHEM CATALYST\u003c\/a\u003e.\u003cbr\u003eThe so treated screen may be used after:\u003cbr\u003e-12 hours, if dried at room temperature\u003cbr\u003e-45 minutes, if dried into air oven at 50°C\u003cbr\u003eNote: the catalyzed photoemulsion may not be reclaimed anymore.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRECLAIMING\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ePlease use \u003ca href=\"https:\/\/screenprintworld.co.uk\/easiway-easisolve-500-emulsion-remover\"\u003eEasiway 500\u003c\/a\u003e to remove this emulsion or \u003ca href=\"https:\/\/screenprintworld.co.uk\/easiway-one-step-ink-emulsion-remover-supra\"\u003eEasiway Supra\u003c\/a\u003e for use with a \u003ca href=\"https:\/\/screenprintworld.co.uk\/dip-tanks-for-cleaning-and-reclaiming\/\"\u003edip tank. \u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSHELF-LIFE\u003c\/strong\u003e\u003cbr\u003eIf stored in its original container at a temperature of maximum 20°C SCREEN-SOL HS ONE will preserve its features for about 1 year from the date of production.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMore information\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIf you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or\u003ca href=\"mailto:info@screenprintworld.co.uk\"\u003e Email\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eData Sheets\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/screenprintworld.co.uk\/wp-content\/uploads\/2026\/05\/SCREEN-SOL-HS-ONE.pdf\"\u003eSCREEN-SOL HS ONE\u003c\/a\u003e (Technical Data Sheet)\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/screenprintworld.co.uk\/wp-content\/uploads\/2026\/05\/SDS_EN_SCREEN-SOL-HS-ONE.pdf\"\u003eSDS_EN_SCREEN-SOL HS ONE\u003c\/a\u003e (Safety Data Sheet)","brand":"Amex","offers":[{"title":"Default Title","offer_id":54249446572375,"sku":"AMHSONE1KG","price":25.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/1299\/4391\/files\/SCREEN-SOL-HS-ONE.png?v=1785948224","url":"https:\/\/screenprintworld.co.uk\/products\/amex-screen-sol-hs-one-pure-polymer-emulsion-1kg","provider":"Screen Print World","version":"1.0","type":"link"}