Matt plastisol high thickness base for 3D textile printing. Phthalate-Free with great elasticity and flexibility.
- 3D Effect
- Matt finishing
- super high thickness
- good elasticity and flexabilty
- Phthalate free
In order to achieve a good 3D effect, We suggest you use screens from 12 to 34 mesh with a maximun thickness of 450µm. If you need to achieve higher thickness you may proceed with subsequent overprinting with intermediate drying. Recommended emulsion: HS 900
Cures at 150/160°C for 2-3 minutes. Printed garments need to be passed through a quality dryer and the ink film needs to reach the desired temperature to be fully fused, variables such as garment thickness and colour, ink deposit and operating climate will need to be taken into account when setting your oven parameters. Always wash test production to ensure prints are adequately cured.
If you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or Email